Menu
Mounting a TV on a brick or concrete wall can be a bit more challenging than mounting it on a drywall, but with the right tools and techniques, it can be done safely and effectively. In this blog post, we will go over the steps you need to take to mount a TV on a brick or concrete wall and ensure a stable and secure installation!
Before you begin, make sure you have all the necessary tools to mount your TV on a brick or concrete wall. You will need a hammer drill, masonry bits, a level, a stud finder, a hammer, and concrete anchors. It’s important to make sure that you have the right size and type of anchors for the weight of your TV and the type of wall you’re working with.
The next step is to locate the studs behind the brick or concrete wall. Use a stud finder to locate the studs and mark their location with a pencil. This is important because the studs will provide the support you need to mount your TV. You can get a high quality stud finder here.
You should always try to use a stud however this isn’t necessary with flat and tilting brackets. Please see step 5 for more information or check out our blog: Wall anchors for TV Mount.
Once you have located the studs, measure and mark the location of your TV on the wall. Make sure to level the marks and double-check the measurements to ensure that the TV will be mounted correctly. Measure from the bottom of the TV to the lower bolt holes on the bracket. To understand how to do this watch this video here.
Using a masonry bit, drill pilot holes for the anchors at the marked locations. Make sure the holes are deep enough to accommodate the anchors.
Once you have located the studs, measure and mark the location of your TV on the wall. Make sure to level the marks and double-check the measurements to ensure that the TV will be mounted correctly. Measure from the bottom of the TV to the lower bolt holes on the bracket. To understand how to do this watch this video here.
Using a masonry bit, drill pilot holes for the anchors at the marked locations. Make sure the holes are deep enough to accommodate the anchors.
To give your mounted TV a clean and polished look, it’s important to conceal the wires. There are a variety of ways to do this, including using a cord cover or routing the wires through the wall. You can check out our detailed instructions on how to hide TV Cords here.
Unfortunately, you can’t mount a TV on a brick wall without drilling. Drilling is necessary to create the pilot holes that will hold the wall anchors in place.
Yes, you’ll need some special tools to mount a TV on a brick wall, including a masonry drill bit and wall anchors designed for use with brick.
Unlike drywall, brick walls do not have studs, but you can use a stud finder to locate the mortar joints between the bricks. The mortar joints are usually the strongest part of the wall and will provide the most secure anchor points for the TV mount.
Yes, you can mount a TV on an exterior brick wall, but you’ll need to take extra care to ensure that the mounting bracket and wall anchors are rated for outdoor use and are able to withstand the elements.
If you make a mistake while drilling into the brick, don’t panic. You can use a masonry repair kit to fill the hole and start over again. Just make sure to let the repair material dry completely before attempting to drill a new pilot hole.
